Safety samfuri karfe ginshiƙai daidaitacce scaffolding ginin ginshiƙai scaffolding,

Takaitaccen Bayani:

 

 

Girma:48MM*2.0MM/40MM*2.0MM–60*2.0MM/56*2.0MM

Sunan samfur:abin bakin ciki karfe props

Matsayin ƙarfe:Q235,S235JR,Q345,S275JR KO kamar yadda ta abokin ciniki ta bukatar

Takaddun shaida:ISO,CE,SGS,GB

Sharuɗɗan biyan kuɗi:T/T 30% ajiya sannan ku biya ma'auni bayan an karɓi kwafin B/L

Lokutan bayarwa:10-15days bayan karɓar ajiyar ku

Kunshin:Ta Akwatuna ko buhu KO bisa ga buƙatun abokin ciniki

Ana lodawa:tashar jiragen ruwa Tianjin/Xingang

Cikakken Bayani

FALALARMU

APPLICATION KYAUTA

TUNTUBE MU

FAQ

Tags samfurin

Bayanin samfurin:

Girman girma 48MM*2.0MM/40MM*2.0MM--60*2.0MM/56*2.0MM
Sunan samfuran abin bakin ciki karfe props
Takaddun shaida ISO, CE, SGS
Sharuɗɗan biyan kuɗi 30% ajiya sannan ku biya ma'auni bayan an karɓi kwafin B/L
Lokutan bayarwa 25days bayan karɓar ajiyar kuɗin ku
Kunshin
  1. Ta Kwalaye ko buhuna
  2. Dangane da buƙatun abokin ciniki
Loda tashar jiragen ruwa Tianjin/Xingang

amfanin abokin ciniki:

Menene fa'idodin abokan ciniki ke samu:

1.mu ma'aikata ne.(Farashin mu zai sami fa'ida akan kamfanonin kasuwanci.)

2.Kada ka damu da ranar bayarwa. mun tabbatar da isar da kaya a cikin lokaci da inganci don cimma gamsuwar abokin ciniki.

Bayanin samfur:

3 4 2


Bambance da sauran masana'antu:

1.we nema samu 3 hažžožin .(Groove bututu, kafada bututu, Victaulic bututu)

2. Port : mu factory kawai 40 kilomita daga Xingang tashar jiragen ruwa , shi ne babbar tashar jiragen ruwa a arewacin kasar Sin .

3.Our masana'antu kayan aiki hada 4 pre-galvanized kayayyakin Lines, 8 ERW karfe bututu samfurin Lines, 3 zafi-tsoma galvanized tsari Lines.

Hotunan abokin ciniki:

10 4 3

Abokin ciniki ya sayi bututun ƙarfe a cikin masana'antar mu. Bayan an samar da kayan, abokin ciniki ya zo masana'antar mu don dubawa.

Harka na abokin ciniki:

Australian abokin ciniki sayan foda shafi pre galvanized karfe square tube. Bayan abokan ciniki sun karɓi kayan a karon farko . Abokin ciniki yana gwada ƙarfin mannewa tsakanin foda da farfajiyar bututun murabba'in. Muna yin taro tare da abokan ciniki don tattauna wannan matsala kuma muna yin gwaje-gwaje koyaushe. mun goge saman bututun murabba'in . Aika bututun murabba'i mai gogewa zuwa tanderun dumama don dumama. Muna gwada kowane lokaci kuma muna tattaunawa tare da abokin ciniki koyaushe. Muna ci gaba da nemo hanyoyi . Bayan gwaje-gwaje da yawa, abokin ciniki na ƙarshe ya gamsu da samfuran. Yanzu abokin ciniki saya babban adadin samfurori daga masana'anta kowane wata.

Samar da samfurori:

pre-galvanized-karfe-bututu-zafi-tsoma-galvanized 钢踏板1 Mala'ika7
d631b6e96b832cd71dfa49e1bcfd843 790433beb403d8b2e46e8f10f8fe816 螺旋钢管3

  • Na baya:
  • Na gaba:

  • Amfaninmu:

    Manufacturer Source: Mu kai tsaye kerar bututun ƙarfe na galvanized, yana tabbatar da farashin farashi da isar da lokaci.

    Kusa da tashar Tianjin: Our factory ta dabarun wuri kusa Tianjin Port facilitates ingantaccen sufuri da kuma dabaru, rage gubar sau da kuma halin kaka ga abokan ciniki.

    Maɗaukaki Masu Ingantattun Kayayyaki da Tsananin Inganci: Muna ba da fifikon inganci ta hanyar amfani da kayan ƙima da aiwatar da tsauraran matakan kulawa a cikin tsarin masana'anta, tabbatar da amincin samfuranmu da karko.

    Sharuɗɗan Biyan kuɗi:

    Deposit da Balance: Muna ba da sharuɗɗan biyan kuɗi masu sassaucin ra'ayi, suna buƙatar ajiya na 30% gaba tare da sauran ma'auni na 70% don daidaitawa bayan karɓar kwafin Bill of Lading (BL), samar da sassaucin kuɗi ga abokan cinikinmu.

    Wasikar Kiredit (LC) wanda ba a iya sokewa: Don ƙarin tsaro da tabbaci, muna karɓar 100% a gani Haruffa na Kiredit mara canzawa, yana ba da zaɓin biyan kuɗi mai dacewa don ma'amaloli na duniya.

    Lokacin Bayarwa:

    Ingantaccen tsarin samar da mu yana ba mu damar cika umarni da sauri, tare da lokacin isarwa a cikin kwanaki 15-20 bayan karɓar ajiya, tabbatar da samar da isasshen lokaci don saduwa da ƙayyadaddun ayyukan da buƙatu.

    Takaddun shaida:

    Samfuran mu sun cika ƙaƙƙarfan ƙa'idodin inganci kuma ƙungiyoyi masu ƙwarewa sun ba da izini, gami da CE, ISO, API5L, SGS, U/L, da F/M, suna nuna bin ƙa'idodin ƙasa da ƙayyadaddun bayanai, da tabbatar da amincin abokin ciniki ga ingancin samfur da aiki.

    Taimakon ƙarfe, wanda kuma aka sani da ƙarfe ko shoring, abubuwan ƙarfe ne da ake amfani da su don ba da tallafi ga gine-gine ko sassa. Suna da aikace-aikace iri-iri, musamman waɗanda suka haɗa da:

     

    1. Ayyukan Gine-gine: A lokacin gini, ana amfani da tallafin ƙarfe don riƙe tsarin wucin gadi irin su shinge, ganuwar wucin gadi, da simintin siminti, tabbatar da aminci da kwanciyar hankali a duk lokacin aikin ginin.

     

    2. Tallafi mai zurfi mai zurfi: A cikin ayyukan tono mai zurfi, ana amfani da tallafin ƙarfe don ƙarfafa bangon tono, hana rushewar ƙasa. Aikace-aikacen gama gari sun haɗa da wuraren ajiye motoci na ƙarƙashin ƙasa, tashoshin jirgin ƙasa, da zurfafa bincike na tushe.

     

    3. Gina Gadar: A cikin ginin gada, ana amfani da tallafin ƙarfe don tallafawa aikin gada da ramuka, tabbatar da kwanciyar hankali ga gadar yayin aikin ginin.

     

    4. Tallafin rami: Lokacin tono rami, ana amfani da tallafin ƙarfe don ƙarfafa rufin rami da bango, hana rushewa da tabbatar da amincin ginin.

     

    5. Ƙarfafa Ƙarfafawa: A cikin gine-gine ko ayyukan ƙarfafa tsarin, ana amfani da tallafin ƙarfe don tallafawa sassan da ake ƙarfafawa na dan lokaci, tabbatar da amincin tsarin a lokacin aikin ƙarfafawa.

     

    6. Ayyukan Ceto da Gaggawa: Bayan bala'o'i ko haɗari, ana amfani da tallafin ƙarfe don ɗan lokaci da aka lalata gine-gine ko gine-gine don hana kara rushewa, samar da aminci ga ayyukan ceto.

     

    7. Tallafin Kayan Aikin Masana'antu: Lokacin shigarwa ko gyara manyan kayan aikin masana'antu, ana amfani da tallafin ƙarfe don ƙarfafa kayan aiki, tabbatar da aminci da kwanciyar hankali yayin aikin shigarwa ko gyarawa.

     

    A taƙaice, tallafin ƙarfe yana taka muhimmiyar rawa a cikin ayyuka daban-daban na gini da aikin injiniya, suna ba da tallafin da ya dace da tabbacin aminci.

     

    Adireshi

    Babban Ofishin: 9-306 Wutong North Lane, Arewa gefen titin Shenghu, Gundumar Yamma ta Sabon Garin Tuanbo, gundumar Jinghai, Tianjin, Sin

    Barka da zuwa ziyarci masana'anta

    Imel

    info@minjiesteel.com

    Gidan yanar gizon hukuma na kamfanin zai aika wani ya ba ku amsa akan lokaci. Idan kuna da wasu tambayoyi, kuna iya tambaya

    Waya

    +86-(0)22-68962601

    Wayar ofis a bude take. Kuna maraba da kira

    Tambaya: Shin kai masana'anta ne?
    A: Ee, mu masu sana'a ne, Muna da masana'anta, wanda ke cikin TIANJIN, China. Muna da manyan iko a samar da fitarwa karfe bututu, galvanized karfe bututu, m sashe, galvanized m sashe da dai sauransu Mun yi alkawari cewa mu ne abin da kuke nema.

    Q: Za mu iya ziyarci masana'anta?
    A: Barka da warhaka da zarar mun sami jadawalin ku za mu ɗauke ku.

    Tambaya: Kuna da iko mai inganci?
    A: Ee, mun sami BV, ingantaccen SGS.

    Tambaya: Za ku iya shirya jigilar kaya?
    A: Tabbas, muna da mai jigilar kaya na dindindin wanda zai iya samun mafi kyawun farashi daga yawancin kamfanonin jirgin ruwa kuma yana ba da sabis na ƙwararru.

    Tambaya: Yaya tsawon lokacin isar ku?
    A: Gabaɗaya kwanaki 7-14 ne idan kayan suna cikin haja. ko yana da 20-25days idan kaya ba a cikin stock, shi ne bisa ga
    yawa.

    Tambaya: Ta yaya za mu iya samun tayin?
    A: Da fatan za a bayar da ƙayyadaddun samfurin, kamar kayan, girman, siffar, da sauransu. Don haka za mu iya ba da mafi kyawun tayin.

    Q: Za mu iya samun wasu samfurori? Duk wani caji?
    A: Ee , za mu iya bayar da samfurin for free cajin amma ba biya kudin kaya . Idan kun sanya oda bayan tabbatar da samfurin, za mu mayar da kuɗin jigilar kaya ko cire shi daga adadin odar.

    Tambaya: Ta yaya kuke sa kasuwancinmu na dogon lokaci da kyakkyawar dangantaka?
    A: 1.We ci gaba da inganci mai kyau da farashi mai tsada don tabbatar da amfanin abokan cinikinmu.
    2.Muna girmama kowane abokin ciniki a matsayin abokinmu kuma muna yin kasuwanci da gaske kuma muna yin abota da su, ko ta ina suka fito.

    Tambaya: Menene sharuɗɗan biyan ku?
    A: 30% T / T ajiya, 70% ma'auni ta T / T ko L / C kafin jigilar kaya.

     

    Ku rubuta sakonku anan ku aiko mana