Mechanical connectors are used to connect soft or hard pipes. The stainless steel reinforcement connector structure is composed of two reinforcement screw heads with the same specification and right-hand thread and a connecting sleeve with right-hand internal thread. One of the two rebars is a standard rebar thread head with an effective thread length of 1 / 2 of the connecting sleeve length; The other is that the effective thread length is the length of the connecting sleeve plus the filament reinforcement head; The connecting sleeve is a standard connecting sleeve. Connection method steps edit broadcast

1. Check whether the connecting sleeve is consistent with the specification of the connected reinforcement; Check whether the thread of reinforcement thread head and the internal thread of connecting sleeve are clean and intact; Check whether the effective thread length of reinforcement wire head meets the requirements of product design.

2 screw the connecting sleeve into one end of the steel wire head with extended thread and screw it to the screw tail.

3 tighten the end face of the other connected reinforcement with standard screw head with the connecting sleeve and the end face of the connected reinforcement.

4 rotate the connecting sleeve in reverse direction to screw the connecting sleeve into the standard steel wire head of another steel bar, and screw the connecting sleeve to the screw tail of the standard steel wire head.

5 adjust the torque wrench to the rated value according to the reinforcement specification, clamp the reinforcement at both ends of the sleeve with the torque wrench, and tighten it to the rated value of the torque wrench. Minjie steel specializes in the production of steel building materials, construction accessories, angle steel connectors and square pipe connectors. Welcome to inquire.